It often happens that a water heater or hot water tank leaks. Don’t panic, this can be a minor problem that experienced DIY enthusiasts can fix themselves. However, if you don’t have a solid foundation in plumbing, we recommend that you hire a professional heating contractor.
Contents
Water leak from your water heater in Fort collins
It is imperative to properly define the origin of the leak because this will determine the type of intervention of our heating plumbers in Fort collins. From a total replacement of your water heater to a simple repair (change of seal, change of safety group, installation of an expansion tank, etc.), we are able to help you!
The causes of a water heater leak in Fort collins
The balloon must be changed if the leak is located on it. This is the most complicated case because there is nothing to do. Check the condition of your water well because the tank can be punctured due to “aggressive” water.
In most cases, the security group is linked to the water heater leak in Fort collins. In this case, the intervention is quite simple for our heating engineers and is not very expensive.
The leakage can also occur at the connections. A problem that may occur due to poor sealing of the connection joints.
The leak at the flange requires the cover to be removed in order to be able to tighten or dismantle it if the problem persists. The water heater must be drained before this type of operation. Take advantage in this case to do a complete cleaning of your water heater in Fort collins.
Contact us for maintenance or repair of water heaters in Fort collins
If you do not know what to do, then don’t wait any longer and contact our plumbing plumbers in Fort Collins for a free quote by phone or leave us a message, we will get back to you as soon as possible for a repair and maintenance quotes from water heater.
How to change a leaking water heater?
A leaking water heater is a major problem, but easy to fix. The first step in repairing your water leak is to determine its origin and cause. Some of the reasons why your water heater may start to leak are:
- His age
- Poor plumbing
- Poor maintenance
- A drain valve that failed
- Excess pressure in the tank
Why is your water heater leaking?
A water heater that is not installed correctly may start to leak prematurely. An improperly tightened drain valve can cause a large leak over time. To solve this problem you can just tighten the valve when you notice the leak.
Over time, the pressure in the tank can cause serious damage to your water heater. High pressure at the water heater and a poor pressure relief valve can damage the heating system. For these water heater pressure issues, it is best to contact a professional plumber, as repairs are complicated and potentially dangerous.
A water heater has a lifespan of 10 to 13 years. With age, leaks at the bottom of the tank may appear, this is when you need to change equipment. These years problems are caused by the accumulation of sediment at the bottom of the water heater tank. Eventually, the bottom of the tank will rust and start to leak. In this case, repairs are not really an option, and the water heater needs to be replaced.
The replacement of the water heater can be done by yourself. However, your best bet is to contact a professional plumber who will know how to do this and guarantee you possible mishandling.
Installing a new water heater: the steps to follow
The first step is to shut off the water supply to the water heater. Also remember to turn off the power supply, if you have an electric water heater, or the gas supply if you have a gas water heater.
The second step is to drain the water from the water heater tank by opening the valve at the bottom of the tank near the floor. It may be helpful to attach a garden hose to the drain valve and route it to a nearby drain to avoid a big mess.
Once the tank is empty, you can remove the gas pipe, the smoke pipe, and the water pipes for a gas water heater, or the supply wires and water pipes for an electric water heater. The water heater can still be a little heavy, so you can use a cart to remove it from your home.
When it is out of the way, clean the area to prepare for the installation of the new water heater. Once the area is prepared, you can install the new unit and begin connecting the water lines, gas or electrical supply, and the flue to the gas water heater. Make sure in the case of a gas water heater to thoroughly check your gas line joints with soap bubbles for gas leaks.
Once the first steps are done, you can open the water line to start filling the water tank. For the gas water heater, do not forget to light the pilot. You also need to make sure that the thermostat is set to the temperature you want, the most common setting is 48 °. At this point, your new water heater is operational.
Water may also escape from the pressure relief valve on the water heater. This can be caused by a faulty valve or by a high-pressure situation in the water heater. To do this, you must:
- Stop the water heater, cut off the water supply, and drain part of the water from the tank.
- Lift the small lever on the valve to release any remaining pressure.
- Use a wrench to unscrew the valve from the tank and replace it with a new valve.
- Use Teflon tape on the threads of the new valve before screwing it into the water heater.
- Turn on the water heater.
Most of the other leaks that you may encounter are repaired by tightening the valves or fittings of the water heater and the connected pipes.
To know more information about cloudmama and thewebgross. When you visit flipboard this site also get proper news about getroblox and newstabportal.
Aptoidey Very Informative News Website Where You Can Found Latest News. Also You Can Visit justspine
