Do you have a well pump? Then you know first hand about the advantages you have over using the municipal water supply. That low monthly bill and clean water are difficult to beat.
However, it also means having more to maintain, and you’ll need to be aware of any necessary repairs or risk losing your water supply. If you’re searching “how do I know if my well pump is bad?” then you’ve come to the right place. This guide will go through all of the signs that it’s time to get your pump fixed.
Let’s get started.
Changes in Water Pressure
One of the first things to look out for if you’re thinking, “is my well pump bad?” is a change in water pressure. You know the deal, you’re ready to take a nice relaxing shower after a long day at work, and when you turn the faucet — a sad stream of water comes out. That’s no way to relax!
There could be several reasons why your water pressure is less than ideal, it may not mean your well pump is going bad, but it’s a good indicator to check it out just in case. Since well pumps run on electric motors, as soon as that motor stops working, that’s when you get a change in water pressure.
If you don’t want to call a professional just yet, test the water pressure yourself! You can use a hose connection and see what the reading is. Then you can take the next steps to fix it.
By now, you know what your well pump is meant to sound like when it’s working correctly. If you begin to hear constant or rapid clicking noises from the pressure switch, that’s a sign that your pump is bad. The pressure tanks house a bladder full of air, which can leak or lose air, leading to noises.
That escaped air goes from the bladder and into the pressure tank, which causes the pump’s motor to strain. This will lower your pump’s life expectancy, and it’s a sure sign that something wrong. If you want the question “how can I tell my well pump is bad?” answered, strange noises are at the top of the list.
Have you noticed that whenever you turn on a faucet, the water starts to “spit?” Then you might need to check the tank bladder. Most likely, there’s air in the system. This can come from a malfunctioning well pump or a break in the water pipe above the pump. To ensure that it’s diagnosed and repaired correctly, you’ll need to pull the well.
Be sure to get this problem solved as quickly as you can. Even if it only occurs on occasion, it can shorten the life span of your well pump. Also, you don’t want to continue to deal with the mess that a spitting faucet causes — even if it’s only happening once in a while.
High-Temperature Shower Water
There’s no doubt that hot showers are wonderful; they’re stress relieving and anxiety-reducing. The problem isn’t hot showers; it’s when the water is hotter than usual, making it impossible to shower without getting burned. This can happen when someone flushes a toilet as you’re trying to defrag, ruining your pleasant alone time.
If this is happening, it’s likely an issue with your pressure tank. Homes tend to have two- or three-handle tub and shower valves. Many don’t have the pressure-balancing spools like newer single-handle valves.
So when there’s a drop in pressure in your faulty tank, more hot water goes through, and that’s where that burning water comes from. It’s unlikely that you want to continue getting surprised by a dramatic change in water temperature when you’re showering, so be sure to get that checked out as quickly as possible.
Poor Tasting Water
Certain hardware issues will cause your water to taste or smell strange. This can be blamed on corroded plumbing pipes, but it might be a problem with your well. After all, wells can be contaminated with things like silt, organic waste, and bacteria. This will cause your water to taste and smell more funky than usual.
The good news is that this isn’t usually dangerous. If you took a couple of sips of some untasty water, it’s likely nothing to worry about. Just be sure to get your pump checked out to avoid further damage.
High Electric Bills
If you allow all of these signs of a bad pump to continue without getting them checked out, you’re sure to get a high electric bill. If you don’t know there’s a problem and your electric bill is higher-than-usual, it could be time to call a professional. Not only do well pump and pressure tank problems cost more, but they’ll reduce the performance of your home’s water system.
When that bill slowly gets higher and higher every month, you’ll want to call a service like Blair and Norris to help get your pump back to working condition. This will ensure you get the best service and have a pump that lasts.
How to Know If My Well Pump Is Bad
No one wants to deal with home repairs; they can be costly and an irksome way to spend your time. The solution isn’t to assume that everything is fine, especially if there are some yellow or red flags. Wondering “how do I know my well pump is bad?” is the first step to figuring out the problem and getting answers.
If you notice things like spitting faucets, poor tasting water, and the occasional scalding showers, you’ll want to call a professional service to get your pump checked out. You’ll be glad you did it.
Looking for more articles like this? Check out the home improvement section of our blog!
Pii-email : Visit Here